The tractor is base equipped with a dual mid-selective control valve ().
Two sets of right-hand-side-mounted couplers allow raising/lowering boom and curling/dumping bucket
Large, 0.9-cm (3/8-in.) diameter quick-couplers are used for maximum oil flow to implements
Hydraulic valves have excellent featherability for smooth operation of equipment
Couplers are color-coded for correct hookup
Optional rear hydraulic couplers - s Up to five additional s can be added:
Single rear electrohydraulic (EH) (EH third )
Dual rear (fourth and fifth )*
Electric diverter kit (includes two additional s)
Power beyond
*NOTE: Only available on 3R Open-Station Tractors.
Single rear EH third
EH third
Includes rear-mounted couplers, hydraulic lines, and lever
Fourth and fifth rear kit (dual rear )
Fourth and fifth controls
Contains two rear–mounted couplers, hydraulic lines, and control levels (not compatible with 3R Cab Tractors)
Diverter valve kit
Contains diverter valve, electric diverter switch, hydraulic lines, and two couplers
Allows the hydraulic oil to be diverted to either the front or rear couplers, as desired
Power beyond kit
The power beyond kit contains rear-mounted couplers and hoses to access pressurized oil at the rear of the tractor; the kit is used for equipment such as a backhoe or log splitter
Couplers are 1.3-cm (1/2-in.) diameter for maximum oil flow to implements
controls
safety lock lever
Single control lever (A) makes operation of a loader or other implement fast and simple
safety lock lever (B) allows the operator to control the type of lever movement needed for a particular operation or situation
The safety lock lever in the top position, indicated by the unlocked lock, allows operation of the lever in all directions; operation of the is totally unlocked
The regeneration (REGEN) position on the bucket spool is available only with the safety lock lever in the top position. As the lever is moved to the right (bucket dump) a slight bump can be felt mid-travel. Continued movement of lever past this bump activates REGEN position on spool.
Loader operation may benefit from the use of the REGEN function. Regenerative hydraulics allow for faster bucket cycle times
The REGEN function allows heavily loaded loader buckets to dump at a faster rate; however, lightly-loaded buckets do not benefit from this function and should be operated in the middle position
Moving the safety lock lever to the middle position prohibits the engagement of the REGEN function of the ; this position is recommended for all attachments except for the front loader with light loads
Moving the safety lock lever to the bottom position will prohibit lever movement in all directions, thus totally locking operation of the
3038R
3039R
3045R
3046R
3120
3320
3520
3720
Two sets of right-hand-side-mounted couplers allow raising/lowering boom and curling/dumping bucket
Large, 0.9-cm (3/8-in.) diameter quick-couplers are used for maximum oil flow to implements
Hydraulic valves have excellent featherability for smooth operation of equipment
Couplers are color-coded for correct hookup
Optional rear hydraulic couplers - s Up to five additional s can be added:
Single rear electrohydraulic (EH) (EH third )
Dual rear (fourth and fifth )*
Electric diverter kit (includes two additional s)
Power beyond
*NOTE: Only available on 3R Open-Station Tractors.
Single rear EH third
EH third
Includes rear-mounted couplers, hydraulic lines, and lever
Fourth and fifth rear kit (dual rear )
Fourth and fifth controls
Contains two rear–mounted couplers, hydraulic lines, and control levels (not compatible with 3R Cab Tractors)
Diverter valve kit
Contains diverter valve, electric diverter switch, hydraulic lines, and two couplers
Allows the hydraulic oil to be diverted to either the front or rear couplers, as desired
Power beyond kit
The power beyond kit contains rear-mounted couplers and hoses to access pressurized oil at the rear of the tractor; the kit is used for equipment such as a backhoe or log splitter
Couplers are 1.3-cm (1/2-in.) diameter for maximum oil flow to implements
controls
safety lock lever
Single control lever (A) makes operation of a loader or other implement fast and simple
safety lock lever (B) allows the operator to control the type of lever movement needed for a particular operation or situation
The safety lock lever in the top position, indicated by the unlocked lock, allows operation of the lever in all directions; operation of the is totally unlocked
The regeneration (REGEN) position on the bucket spool is available only with the safety lock lever in the top position. As the lever is moved to the right (bucket dump) a slight bump can be felt mid-travel. Continued movement of lever past this bump activates REGEN position on spool.
Loader operation may benefit from the use of the REGEN function. Regenerative hydraulics allow for faster bucket cycle times
The REGEN function allows heavily loaded loader buckets to dump at a faster rate; however, lightly-loaded buckets do not benefit from this function and should be operated in the middle position
Moving the safety lock lever to the middle position prohibits the engagement of the REGEN function of the ; this position is recommended for all attachments except for the front loader with light loads
Moving the safety lock lever to the bottom position will prohibit lever movement in all directions, thus totally locking operation of the
Fits On
3033R3038R
3039R
3045R
3046R
3120
3320
3520
3720
{"sku":"SKU|BLV10761","spec_notab_51_weight":"Weight|41.1 Pound","spec_notab_512_middle_dimension":"Middle Package Dimension|23 Inch","spec_notab_511_largest_dimension":"Largest Package Dimension|45 Inch","promoted_feature_entity_attribute":"Promoted Features|RDO Promise","spec_notab_513_smallest_dimension":"Smallest Package Dimension|17.75 Inch","part_cdk_id":"Part ID|13151823","shipping_group":"Shipping Group|OVERSIZE","feature_bullet_1":"Feature 1|Versatility: Dual Rear 4th & 5th selective control valve kits allow the use of additional implements and attachments such as brooms, backhoes, grapples, and rotary cutters","feature_bullet_2":"Feature 2|Compatibility: Fits open station 3R tractors","part_cdk_company":"Company|01","part_cdk_division":"Division|01","part_cdk_type_code":"Type Code|54","part_cdk_list_price":"List Price|1078","part_cdk_part_class":"Part Class|TP2","part_cdk_branch_code":"Branch Code|99","part_cdk_branch_name":"Branch Name|Fargo FSO","part_cdk_description":"CDK Description|SELECTIVE CONTR","part_cdk_part_number":"Part Number|BLV10761","part_cdk_part_source":"Part Source|LV","part_cdk_part_status":"Part Status|A","part_cdk_vendor_code":"Vendor Code|DEERE","part_cdk_vendor_name":"Vendor Name|JOHN DEERE","part_cdk_product_line":"Product Line|AGXXXX","shipping_fulfillment_bullet":"Shipping/Fulfillment Bullet|Oversize Freight"}